Backup Lamp Switch: Service and Repair

REMOVE OR DISCONNECT
1. Negative (-) battery cable. Refer to Starting and Charging.
2. Backup lamp switch electrical connector.
3. Backup lamp switch wire from retaining clamp.
4. Backup lamp switch from left case.

Inspect
- Backup lamp switch O-ring for cuts or damage. Replace as necessary.

INSTALL OR CONNECT

1. Backup lamp switch into left case.

Tighten
- Backup lamp switch to 23 N.m (17 lb. ft.).

2. Backup lamp switch wire into retaining clamp.
3. Backup lamp switch electrical connector.
4. Negative (-) battery cable. Refer to Starting and Charging.