Rear

Remove or Disconnect
1. Right rear combination lamp assembly. Refer to Lighting Systems and Horn.
2. Wheel speed sensor jumper to harness connector.
3. Raise and suitably support vehicle.
4. Two bolts and rear wheel speed sensor cover.
5. Wheel speed sensor electrical connector.
6. Jumper harness, including pass-through grommet, from vehicle.

Install or Connect
1. Jumper harness, including pass-through grommet, to vehicle.
2. Wheel speed sensor electrical connector.
3. Two bolts and rear wheel speed sensor cover.
^ Tighten Rear wheel speed sensor cover bolts to 15 Nm (11 ft. lbs.).

4. Lower vehicle.
5. Wheel speed sensor jumper to harness connector.
6. Right rear combination lamp assembly. Refer to Lighting Systems and Horn.