Front

Important: Wheel speed sensor is serviceable only as an assembly. Do not attempt to service the sensor harness pigtail.

Remove or Disconnect
1. Negative (-) battery cable.
2. Wheel housing. Refer to Body Front End.
3. Wheel speed sensor electrical connector.

Front Wheel Speed Sensor Pigtail Harness:

4. Two nuts and clip retaining wheel speed sensor pigtail harness to vehicle.

Front Wheel Speed Sensor:

5. One bolt and wheel speed sensor from steering knuckle.

Install or Connect
1. Wheel speed sensor to steering knuckle; secure with one bolt.
^ Tighten Front wheel speed sensor bolt to 7.8 Nm (69 inch lbs.).

2. Wheel speed sensor pigtail harness to vehicle; secure with two nuts and clip.
^ Tighten Front wheel speed sensor pigtail harness nuts to 5.4 Nm (48 inch lbs.).

3. Wheel speed sensor electrical connector.
4. Wheel housing.
5. Negative (-) battery cable.