Speed Sensor Jumper Harness

WHEEL SPEED SENSOR JUMPER HARNESS
Between each wheel speed sensor and the main wiring harness is a jumper harness made up of highly flexible twisted pair wiring. This wiring exists because the main harness must connect to the suspension of the vehicle, thus the wiring in this area is subjected to the same motion as a spring or shock absorber. Consequently, any repair to this section of the wiring harness will result in stiffening and eventual failure due to wire fatigue. For this reason, THE WHEEL SPEED SENSOR JUMPER HARNESSES ARE NOT REPAIRABLE AND MUST BE REPLACED. DO NOT ATTEMPT TO SOLDER, SPLICE, OR CRIMP THESE HARNESSES AS EVENTUAL FAILURE WILL RESULT.