Rear Combination Lamp Assembly Lamp Assembly Replacement

Rear Combination Lamp Assembly (2-Door):

Rear Combination Lamp Assembly (4-Door):

Remove or Disconnect
1. Negative (-) battery cable.
2. On door Models: Open rear compartment lid and remove one nut. It will be necessary to pull away trunk carpet to locate nut.
3. Two screws securing rear combination lamp assembly.
4. Pull rear combination lamp assembly away from rear end panel to gain access to bulb sockets.
5. Bulb sockets from lamp assembly.
6. Rear combination lamp assembly from vehicle.

Install or Connect
1. Bulb sockets to rear combination lamp assembly.
2. Rear combination lamp assembly to rear end panel; secure with two screws (one nut inside rear compartment in 4-Door models).
3. Negative (-) battery cable.