Rear Combination Lamp Assembly Bulb Replacement

Rear Combination Lamp Assembly (2-Door):

Rear Combination Lamp Assembly (4-Door):

Remove or Disconnect
1. Negative (-) battery cable.
2. On door Models: Open rear compartment lid and remove one nut. It will be necessary to pull trunk carpet to locate nut.
3. Two screws securing rear combination lamp assembly.
4. Pull rear combination lamp assembly away from rear end panel to gain access to bulb sockets.
5. Lamp socket(s) from lamp assembly where necessary.
6. Bulb(s) from socket(s) where necessary.

Install or Connect
1. Bulb(s) to lamp socket(s) where necessary.
2. Lamp socket(s) to rear combination lamp assembly where necessary.
3. Rear combination lamp assembly to rear end panel; secure with two screws (one nut inside rear compartment on Door models).
4. Negative (-) battery cable.