Cylinder Head - Disassembly

TOOL REQUIRED
- J 37979 Valve Spring Compressor Adapter
- J 8062 Valve Spring Compressor
- J 37968 Valve Guide Seal Installer Kit

CAUTION: Keep all disassembled parts except valve stem seals and valve guides (which must be replaced) in order by cylinder so they can be installed in their original position.

REMOVAL
1. Six camshaft housing bolts and camshaft from cylinder head.








2. Using Valve Spring Compressor with Valve Spring Compressor Adapter, compress valve springs and remove valve cotters from valve.
3. Release and remove The Valve Spring Compressor and Valve Spring Compressor Adapter.





4. Valve spring retainer, valve spring, valve from combustion chamber side, valve guide, valve spring seat and valve stem seal from cylinder head.

CAUTION: Do not reuse valve stem seal once disassembled. Be sure to use new seal when reassembling.

5. Using a Valve Guide Remover, drive valve guide out from combustion chamber side to valve spring side.

CAUTION: Do not reuse valve guide once disassembled. Be sure to use new valve guide when assembling.