Trim Plate

Center Console Trim Bezel Screws:

Remove or Disconnect
1. Negative (-) battery cable.
2. Ashtray from ashtray guide by depressing spring loaded tab and pulling rearward.
3. Pull out instrument panel compartment while pushing its stopper from both right and left sides. Disconnect cigar lighter electrical connector.
4. Four screws and center console trim bezel.
5. Cigar lighter (if required).

Install or Connect
1. Cigar lighter (if removed).
2. Center console trim bezel, secure with four screws.
3. Cigar lighter electrical connector and close instrument panel compartment.
4. Slide ashtray into ashtray guide until spring loaded tab engages.
5. Negative (-) battery cable.