I. 1ST-Reverse Brake Assembly

REMOVE OR DISCONNECT





1. Two 1st-reverse brake piston seals from 1st-reverse brake piston.

Clean
- All 1st-reverse brake components and dry thoroughly.

Inspect
1. 1st-reverse brake discs for excessive wear or damage. Replace as necessary.
2. 1st-reverse brake piston for cracks or porosity. Replace as necessary.
3. 1st-reverse brake piston return spring for distortion or weakness. Replace as necessary.

INSTALL OR CONNECT
1. Two new 1st-reverse brake piston seals onto 1st-reverse brake piston.