Troubleshooting Hints

PROCEDURE
1. Check Fuse C-1 wit a fuse tester and Fuse C-5 by operating the dome lamp.
2. Check that all connections are clean and tight.
3. Make sure ground G202 is clean and tight.
4. If radio functions but does not illuminate, perform the following checks:
^ If radio digital display does not illuminate with light switch in OFF, remove radio for repair.
^ If radio digital display lights with light switch in OFF, but goes out with light switch in PARK or HEAD, check for an open in RED/GRN wire between S242 and Radio. If OK, remove radio for repair.
^ If radio digital display lights with light switch in OFF, and remains lit with the light switch in PARK or HEAD, check for an open in GRN/RED wire between S300 and Radio. If OK, remove radio for repair.

5. If after radio has been disconnected and reconnected, the display indicates "LOC," refer to Antitheft and Alarm Systems.