Throttle Body: Service and Repair

Throttle Body









Removal and Installation

1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering Diagrams.

2. Disconnect the Throttle Position (TP) sensor electrical connector.

3. Disconnect the electronic throttle control electrical connector.

4. Remove the 4 bolts and the Throttle Body (TB) and discard the gasket.
- To install, tighten to 10 Nm (89 lb-in).

5. To install, reverse the removal procedure.
- Install a new TB gasket.