TR6060

Transmission Rear Support Insulator

Transmission Rear Support Insulator









1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. NOTE: Note that the crossmember hump side goes up.

Remove the transmission crossmember. For additional information, refer to Uni-Body, Subframe and Mounting System Crossmember Brace - Exploded View.

3. Remove the 2 transmission rear support insulator nuts. Separate the transmission rear support insulator from the transmission mount.
- To install, tighten to 70 Nm (52 lb-ft).

4. To install, reverse the removal procedure.