Manual Transmission

Selector Plate

Selector Mechanism









Disassembly

1. Remove the 2 selector plate bolts.





2. Remove the selector mechanism.

1. Fifth and reverse gear selector rod.

2. Selector shift shaft.

3. Reverse gear selector lever.

4. Fifth and reverse gear selector rod guide sleeve.

5. Selector plate.





Assembly

1. Install the selector mechanism.

1. Selector plate.

2. Fifth and reverse gear selector rod guide sleeve.

3. Reverse gear selector lever.

4. Selector shift shaft.

5. Fifth and reverse gear selector rod.





2. Install the 2 selector plate bolts.
- Tighten to 22 Nm (16 lb-ft).