Fuel Pump Control Unit: Service and Repair

Fuel Pump Control Module









Removal and Installation

1. Remove the LH front seat. For additional information, refer to Seating Seat.

2. NOTE: The Fuel Pump (FP) control module is located on the rear surface of the LH front seat mount.

Disconnect the FP control module electrical connector.

3. NOTICE: Do not overtighten the fasteners or damage to the module may occur.

Remove the 2 FP control module nuts.

- To install, tighten to 5 Nm (44 lb-in).

4. To install, reverse the removal procedure.