Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Electrical - Wrench Lamp ON, DTCs P2126, P2127, P2138
  • Engine Controls - MIL ON, DTC P0456 Stored In Memory
  • Electrical - MIL ON, DTC U029F, No Crank, Fuse F27 Open
  • A/T - Grind/Rattle In 2nd and 4th/Reverse Gears
  • A/T, Engine Controls - MIL ON/DTC's Set/TCS Lamp ON
  • Engine Controls - Starting/A/T Engagement Issue/MIL/DTCs
  • Electrical - MIL ON/DTC U029F/No Crank Condition
  • Engine, A/T Controls - Harsh 1-2 Shifts
  • A/T - Rattle/Grinding Noise In Reverse
  • Engine - Slow Return To Idle
  • Engine Controls - Rolling Idle At High Altitude/Temps.
  • Locks - Autolock(R) Function Non Operational
  • A/T - Grind/Rattle Noise In 2nd, 3rd, 4th/5th Gear
  • ASMT Controls - Hesitation/Harsh 1-2 Shifts
• By Symptom
  • Abnormal wear/deterioration
    • Electrical - MIL ON/DTC U029F/No Crank Condition
  • Customer Interest
    • Electrical - Wrench Lamp ON, DTCs P2126, P2127, P2138
    • Engine Controls - MIL ON, DTC P0456 Stored In Memory
    • Electrical - MIL ON, DTC U029F, No Crank, Fuse F27 Open
    • A/T - Grind/Rattle In 2nd and 4th/Reverse Gears
    • A/T, Engine Controls - MIL ON/DTC's Set/TCS Lamp ON
    • Engine Controls - Starting/A/T Engagement Issue/MIL/DTCs
    • Electrical - MIL ON/DTC U029F/No Crank Condition
    • Engine, A/T Controls - Harsh 1-2 Shifts
    • A/T - Rattle/Grinding Noise In Reverse
    • Engine - Slow Return To Idle
    • Engine Controls - Rolling Idle At High Altitude/Temps.
    • Locks - Autolock(R) Function Non Operational
    • A/T - Grind/Rattle Noise In 2nd, 3rd, 4th/5th Gear
    • ASMT Controls - Hesitation/Harsh 1-2 Shifts
  • Driveability
    • Engine - Slow Return To Idle
    • Engine Controls - Rolling Idle At High Altitude/Temps.
  • Hard Shifting
    • Engine, A/T Controls - Harsh 1-2 Shifts
  • Hard shifting/Stiff clutch
    • ASMT Controls - Hesitation/Harsh 1-2 Shifts
  • Noise
    • A/T - Grind/Rattle In 2nd and 4th/Reverse Gears
    • A/T - Rattle/Grinding Noise In Reverse
    • A/T - Grind/Rattle Noise In 2nd, 3rd, 4th/5th Gear
  • Starting problems
    • Electrical - MIL ON, DTC U029F, No Crank, Fuse F27 Open
    • Engine Controls - Starting/A/T Engagement Issue/MIL/DTCs
    • Electrical - MIL ON/DTC U029F/No Crank Condition
• All Technical Service Bulletins
  • Electrical - Wrench Lamp ON, DTCs P2126, P2127, P2138
  • Engine Controls - MIL ON, DTC P0456 Stored In Memory
  • Electrical - MIL ON, DTC U029F, No Crank, Fuse F27 Open
  • A/T - Grind/Rattle In 2nd and 4th/Reverse Gears
  • A/T, Engine Controls - MIL ON/DTC's Set/TCS Lamp ON
  • Engine Controls - Starting/A/T Engagement Issue/MIL/DTCs
  • Electrical - MIL ON/DTC U029F/No Crank Condition
  • Engine, A/T Controls - Harsh 1-2 Shifts
  • A/T - Rattle/Grinding Noise In Reverse
  • Emissions - MIL ON/DTC's P0455/P0456 Set
  • Engine - Slow Return To Idle
  • Engine Controls - Rolling Idle At High Altitude/Temps.
  • Locks - Autolock(R) Function Non Operational
  • A/T - Grind/Rattle Noise In 2nd, 3rd, 4th/5th Gear
  • ASMT Controls - Hesitation/Harsh 1-2 Shifts