Oil Level Indicator and Tube

Oil Level Indicator and Tube













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Detach the Evaporative Emission (EVAP) canister purge valve from the bracket and position aside.

3. Remove the oil level indicator and tube bolt.
- To install, tighten to 10 Nm (89 lb-in).

4. Remove the oil level indicator and tube from the cylinder block.
- Discard the O-ring seal.

5. NOTE: Lubricate the new oil level indicator tube O-ring seal with clean engine oil prior to installation.

To install, reverse the removal procedure.