EGR Tube: Service and Repair

Exhaust Gas Recirculation (EGR) System Module Tube

Removal and Installation

Vehicles with 5.4L 4V engine

1. Remove the battery tray. For additional information, refer to Battery.

All vehicles

2. Disconnect the EGR system module tube-to-EGR system module fitting.
- To install, tighten to 40 Nm (30 lb-ft).

3. Disconnect the EGR system module tube-to-exhaust manifold fitting and remove the tube.
- To install, tighten to 40 Nm (30 lb-ft).

4. To install, reverse the removal procedure.