Connecting Rod, Engine

Rod Bearing Cap

Using the original connecting rod cap bolts, install the connecting caps and bolts.
Tighten the bolts in 2 stages.
Stage 1: Tighten to 29 Nm (21 lb-ft).
Stage 2: Tighten an additional 90 degrees.

Connecting Rod

Crank bore diameter 55.023 - 55.047 mm (2.166 - 2.167 in)
Pin bore diameter 20.965 - 20.985 mm (0.825 - 0.826 in)
Length (center-to-center) 151.8 mm (5.976 in)
Side clearance 1.95 - 3.05 mm (0.076 - 0.120 in)
Axial clearance 0.14 - 0.36 mm (0.005 - 0.014 in)