Automatic Transmission Dipstick - Dipstick Tube: Service and Repair

Transmission Filler Tube









Removal and Installation

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Vehicle Jacking and Lifting. Failure to follow the instructions may result in serious personal injury.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the transmission filler tube bolt.





3. Remove the transmission filler tube.





4. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to Vehicle Jacking and Lifting. Failure to follow these instructions may result in serious personal injury.

To install, reverse the removal procedure. If equipped with a fire suppression system, repower the system.
- Tighten to 48 Nm (35 lb-ft).