Brake Shoes

Brake System Inspection






Brake Shoes

1. Inspect and measure the thickness of the brake shoe friction material. For additional information, refer to Specifications.
- Minor surface cracks do not require shoe replacement, however, if there are missing chunks or cracks in the lining through to the backing plate, install new brake shoes.

- If the thickness of the friction material is less than the specified thickness, install new brake shoes.

- Verify that the mounting hardware is installed correctly and operating correctly. Install new hardware as necessary.

- Verify that the backing plate contact points are free of corrosion that may cause binding. Clean or install new as necessary.

- Verify correct brake shoe adjustment.