Spark Plug: Service and Repair

SPARK PLUGS

Exploded View

LH Ignition Components:

RH Ignition Components:

Removal and Installation
1. Remove the ignition coil-on-plugs.

2. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage may occur to the cylinder head or spark plug.

NOTE:
- Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.
- If an original spark plug is used, make sure it is installed in the same cylinder from which it was taken. New spark plugs can be used in any cylinder.

Remove the 8 spark plugs.
- To install, tighten to 18 Nm (13 lb-ft).

3. Inspect the spark plugs. Install new spark plugs as necessary.
4. Adjust the spark plug gap as necessary.







5. To install, reverse the removal procedure.