Ignition Coil: Service and Repair

IGNITION COIL-ON-PLUG

Exploded View

RH Ignition Components:

LH Ignition Components:

Removal and Installation
1. Disconnect the ignition coil electrical connectors.
2. Remove the ignition coil bolts.
- To install, tighten to 5 Nm (44 lb-in).

3. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.

Remove the ignition coils.

4. To install, reverse the removal procedure.
- Apply a light film of brake caliper grease to the inside of the coil boots before installation.