Satelite Digital Audio Reciever System (SDARS) Module

SATELLITE DIGITAL AUDIO RECEIVER SYSTEM (SDARS) MODULE







Removal and Installation
1. Set the RH luggage compartment trim aside.
- Remove the push-pins, as required.

2. NOTE: When installing the nuts, tighten the 2 rear nuts before tightening the front 2 nuts.

Remove the 4 nuts and the satellite digital audio receiver system (SDARS) module.
- Disconnect the electrical connectors.
- To install, tighten the nuts to 7 Nm (62 lb-in).

3. To install, reverse the removal procedure.