Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Procedures

FUEL TANK DRAINING

Special Tool(s)


Special Tool(s):






Draining

WARNING:
- Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
- Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
- Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.


1. Release the fuel filler cap and position aside.







2. NOTE: The safety valve is located at the inlet of the fuel tank.

Insert a suitable drain tube into the fuel tank filler pipe until it enters the fuel tank inlet, opening the safety valve.







3. Attach the fuel storage tanker to the drain tube and remove as much fuel as possible from the fuel tank.