Seat Cushion - Rear
SEAT CUSHION - REARDisassembly and Assembly
1. Remove the rear seat cushion.
- From underneath the cushion front edge, push the 2 seat cushion latch releases toward the LH side of the vehicle.
- Lift up the front edge of the cushion and remove.
2. Remove all the hog rings from the outer edge of the cushion trim cover.
3. Invert the cushion trim cover and remove all the inner rows of hog rings.
4. Remove the cushion trim cover.
5. To remove the seat cushion latches, use an appropriate tool to release the locking tabs and pry upwards.
6. To assembly, reverse the disassembly procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.