Seat Cushion Cover - Rear

SEAT CUSHION COVER - REAR

Exploded View

Seat Cushion - Rear:

Removal and Installation
1. Remove the rear seat cushion.
- From underneath the cushion front edge, push the 2 seat cushion latch releases toward the LH side of the vehicle.
- Lift up the front edge of the cushion and remove.

2. Remove all the hog rings from the outer edge of the cushion trim cover.
3. Invert the cushion trim cover and remove all the inner rows of hog rings.
4. Remove the cushion trim cover.
5. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.