Seat Backrest Cover - Rear

SEAT BACKREST COVER - REAR

Removal and Installation
1. Release the lower J-clip and hook-and-loop strip.

2. CAUTION: Use care when separating the backrest trim cover from the hook-and-loop strips, or the hook-and-loop strips can be torn from the backrest foam pad.

Separate the hook-and-loop strips and invert the backrest trim cover to the row of hog rings.

3. Remove the row of hog rings.
4. Invert and remove the backrest trim cover.
- Route the latch release strap through the backrest trim cover opening.

5. To install, reverse the removal procedure.