Roof Opening Panel Glass

ROOF OPENING PANEL GLASS

Exploded View

Part 1:

Part 2:

Removal

1. NOTE: Make sure the roof opening panel glass is in the vent position.

Remove the 4 roof opening panel glass screws.

2. Remove the roof opening panel glass.

Installation

1. NOTE: Do not fully tighten the roof opening panel glass screws at this stage.

Position the roof opening panel glass and loosely install the 4 screws.

2. Align the roof opening panel glass. For additional information, refer to Roof Opening Panel Alignment. Adjustments
3. Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. Programming and Relearning