Quarter Trim Panel - 4-Door

QUARTER TRIM PANEL - 4-DOOR

Exploded View

2 Door (Part 1):

2 Door (Part 2):

4 Door (Part 1):

4 Door (Part 2):

Removal and Installation
1. Remove the D-pillar trim panel.
2. Remove the rear seat bolster.
3. Remove the safety belt lower anchor.
- To install, tighten to 40 Nm (30 lb-ft).







4. Position aside the rear door weatherstrip.
5. Remove the upper quarter trim panel bolt cover.
6. Remove the upper quarter trim panel bolt.
7. Remove the upper and lower quarter trim panels.
- Pull the upper quarter trim panel outward to release the upper quarter trim panel retaining clips.
- Separate the upper quarter trim panel from the lower quarter trim panel.

8. Remove the safety belt from the lower quarter trim panel.
- Remove the safety belt retractor bezel from the lower quarter trim panel.
- Remove the safety belt retractor bezel from the safety belt.
- Feed the safety belt through the lower quarter trim panel.

9. To install, reverse the removal procedure.