Rear Shelf: Service and Repair

PARCEL SHELF







Removal and Installation

All vehicles
1. Remove the rear seat cushion.
- From underneath the cushion front edge, push the 2 seat cushion latch releases toward the LH side of the vehicle.
- Lift up the front edge of the cushion and remove.

2. Remove the rear center safety belt anchor bolt.
- To install, tighten to 55 Nm (41 lb-ft).







4 door
3. Remove the RH and LH quarter trim panels.

2 door
4. Remove the RH and LH C-pillar trim panels.
5. Remove the RH and LH safety belt retractor trim panels.

All vehicles
6. Fold the rear seat backs downward to the flat position.
7. Remove the center safety belt retractor bezel.
- Pull the center safety belt retractor bezel toward the front of the vehicle.
- Remove the center safety belt retractor bezel from the center safety belt.







8. Remove the 2 parcel shelf pin-type retainers.
9. Remove the parcel shelf.
- Pull the parcel shelf toward the front of the vehicle.

10. To install, reverse the removal procedure.