Front Fender: Service and Repair
FENDERExploded View
Part 1:
Part 2:
Removal and Installation
1. Remove the front bumper cover.
2. Remove the headlamp assembly.
3. Remove the fender splash shield.
4. Remove the bumper cover mounting bracket-to-radiator grille opening panel reinforcement pushpin.
5. Remove the bumper cover mounting bracket retainer screws and remove the bracket.
6. Remove the front fender inner bolt.
- To install, tighten to 8 Nm (71 lb-in).
7. Remove the front fender lower bolt.
- To install, tighten to 8 Nm (71 lb-in).
8. Open the front door and remove the front fender rear bolt.
- To install, tighten to 8 Nm (71 lb-in).
9. Remove the front fender front bolt.
10. Remove the 2 front fender upper bolts and the fender.
- To install, tighten to 8 Nm (71 lb-in).
11. To install, reverse the removal procedure.