Transmission Mount: Service and Repair

Transmission Insulator and Retainer

Transmission Insulator and Retainer:

Removal

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire Suppression System. Failure to follow the instructions may result in serious personal injury.

Remove the transmission support crossmember.
2. Remove the transmission support insulator.





3. To install, reverse the removal procedure.
^ Tighten to 90 Nm (66 lb-ft).





4. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.

If equipped with fire suppression system, repower the system.