Fog/Driving Lamp: Service and Repair

FOG LAMP

Base Fog Lamp:

Street Appearance Package Fog Lamp:

Removal and Installation

All vehicles

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the radiator lower air deflector.
1 Remove the 8 screws.
2 Remove the 5 pin-type retainers.

Base fog lamp
3. Remove the 3 screws and the fog lamp.
- Disconnect the electrical connector.

Street appearance package fog lamp
4. Remove the 4 screws and the fog lamp.
- Disconnect the electrical connector.

All vehicles
5. To install, reverse the removal procedure.
- If necessary, adjust the fog lamps.