Seat Backrest Latch - Rear, 3-Door/5-Door/Wagon

SEAT BACKREST LATCH - REAR, 3-DOOR/5-DOOR/WAGON

Seat Backrest - Rear, Front View:

Seat Backrest - Rear, Rear View:

Seat Backrest - Rear, 40 Percent, 3-Door, 5-Door And Wagon:

Seat Backrest - Rear, 60 Percent, 3-Door And 5-Door:

Exploded View

Removal and Installation
1. Disassemble the rear seat backrest.







2. NOTE: Note the routing of the retractor lock bowden cable when removing to aid installation.

Detach the retractor lock cable.

3. Remove the 2 screws and backrest latch.
- To install, tighten to 28 Nm (21 lb-ft).

4. CAUTION: Check the operation of the safety belt retractor, the cable routing and latch interlock operation before fully assembling the rear seat backrest.

To install, reverse the removal procedure.
- Verify the safety belt retractor operates without excessive effort or binding.