Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube

Material:

Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the oil pan.





3. Remove the 2 bolts and the oil pump screen and pickup tube.
^ Discard the gasket.

Installation
1. Clean and inspect all mating surfaces.
2. Install the 2 oil pump screen and pickup tube bolts and the oil pump screen and pick-up tube with a new mounting gasket.
^ Tighten to 10 Nm (89 inch lbs.).
3. Install the oil pan.