Rear

Wheel Speed Sensor-Rear








Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the wheel speed sensor bolt.
^ To install, tighten to 11 Nm (8 ft. lbs.).

4. NOTE: Clean off all dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal.

Remove the wheel speed sensor.
5. Remove the wheel speed sensor harness retainer.
6. Remove the wheel speed sensor harness pin-type retainer.
7. Remove the wheel speed sensor and harness assembly.
8. To install, reverse the removal procedure.