After On-Board Diagnostics

After On-Board Diagnostics

NOTE: The vehicle wiring harness, Powertrain Control Module and non-transaxle sensors may affect transaxle operations. Repair these concerns first.

After the on-board diagnostic procedures are completed, repair all DTCs.

Begin with non-transaxle related DTCs, then repair any transaxle related DTCs. Refer to Diagnostic Trouble Code Charts for information on condition and symptoms. Trouble Code Diagnostic Charts This chart will be helpful in referring to the correct manual(s) and aids in diagnosing internal transaxle concerns and external non-transaxle inputs. The pinpoint tests are used in diagnosing transaxle electrical concerns. Make sure that the vehicle wiring harness and the PCM are diagnosed as well. The Computers and Control Systems will aid in diagnosing non-transaxle electronic components.