Brake Disc Removal and Installation, Rear
Removal and Installation1. Release the parking brake.
2. Remove the wheel and tire.
3. Remove the parking brake cable from the brake caliper.
1 Pull back the parking brake lever.
2 Disconnect the cable from the parking brake lever.
3 Remove the cable conduit retaining clip.
4 Remove the cable from the brake caliper.
4. Remove the brake caliper and anchor plate from the wheel knuckle.
5. Remove the brake disc.
- Remove the retaining clip (if equipped).
6. To install, reverse the removal procedure.
7. Adjust the parking brake cable.