Cluster Finish Panel

INSTRUMENT CLUSTER FINISH PANEL

Removal and Installation
1. Remove the audio unit.







2. Remove the RH instrument panel finish panel.
- Disconnect the electrical connectors.







3. Remove the LH instrument panel finish panel.
- Disconnect the electrical connectors.

4. If equipped with steering column shift, place the transmission range selector lever in the 1 position.
5. Tilt the steering column in the full down position.







6. Remove the instrument cluster finish panel.
1 Remove the screws.
2 Remove the instrument panel cluster finish panel.
- Disconnect the electrical connectors.

7. To install, reverse the removal procedure.