Reverse Servo Assembly

Reverse Servo Assembly

NOTE: Inspect the reverse servo piston seal for damage. If damaged, a new piston and seal assembly will need to be installed.

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

1. Disassemble the parts in the order indicated in the illustration and table.
2. To assemble, reverse the disassembly procedure.

Item 4: Reverse Servo Plate Disassembly Note





1. WARNING: The upper and lower servo covers are under spring tension. Use care when separating the two halves. Failure to follow these instructions may result in personal injury.

NOTE: Tabs on servo plate mate with slots on cover every 120 degrees.

Remove the reverse servo plate by turning in either direction to release.
^ Align the arrow on the servo plate with any slot on the cover.

Item 7: Reverse Servo Piston O-Ring Assembly Note





1. NOTE: Try not to roll the seal onto the housing when installing the seal or damage to the seal can occur.

Lubricate and install a new reverse servo piston seal.

Item 4: Reverse Servo Plate Assembly Note





1. WARNING: The upper and lower servo covers are under spring tension. Use care when separating the two halves. Failure to follow these instructions may result in personal injury.

CAUTION: The arrow on the servo plate must be aligned evenly between any two slots on the cover.

Install the reverse servo plate.