Vehicle Damage Warnings

CAUTION:
^ If the liquid or vapor tube is damaged (torn, holes or delaminated) the affected tube assembly must be installed new. Do not use aftermarket sleeving. Do not re-adhere loose sleeving material.
^ When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector retaining clip area before separating from the tube. Apply clean engine oil to the end of the tube before inserting the tube into the connector.
^ When removing the fuel tank vent and filler pipes, do not use any sharp edge tools to lever off the pipes. Failure to follow this instruction may result in damage to the filler pipes.
^ When supporting the fuel tank, use a suitable packing material to prevent damage to the underside of the fuel tank.
^ When lowering the fuel tank, make sure that excessive strain is not placed on the fuel lines and electrical connectors.
^ Make sure not to bend or deform the fuel tank straps during removal of the tank.
^ Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.