Cable Bracket

REMOVAL







1. Disconnect the accelerator cable from the throttle control lever and the accelerator cable bracket.
1 Disconnect the cable housing from the accelerator cable bracket.
2 Disconnect the accelerator cable end from the throttle control lever.
3 Position the accelerator cable aside.







2. Disconnect the speed control cable from the throttle control lever and the accelerator cable bracket.
1 Disconnect the speed control actuator cable from the throttle control lever.
2 Disengage the speed control actuator cable sleeve from the retainer.
3 Remove the retainer.
3. Remove the throttle body.







4. Remove the bolts and the accelerator cable bracket.

INSTALLATION







1. To install, reverse the removal procedure.
^ Adjust the accelerator cable.