Audible Warning Device Control Module: Service and Repair

MODULE - WARNING CHIME

REMOVAL







1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable.







2. Remove the scuff plate, the pushpins and the LH cowl side trim panel.







3. Remove the nut and disconnect the interior fuse junction panel from the upper mounting tab.







4. Position the fuse junction panel to gain access to the module.
1 Release the retainer clip.
2 Remove the module.

INSTALLATION







1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy

To install, reverse the removal procedure.