Alignment

Suspension System

Part 1 Of 2:

Part 2 Of 2:

Front Suspension Components

The front strut and spring assemblies can be disassembled to replace any of the individual components. The LH or RH front strut and spring assemblies can be replaced independently.
The front suspension system can also be disassembled in order to replace the:
^ Front wheel knuckle.
^ Wheel hub.
^ Lug bolts.
^ Front wheel bearing.
^ Front disc brake rotor shields.
^ Front suspension lower arms.
^ Front suspension lower arm ball joints.
^ Front suspension lower arm mounting bolt bushings.
All front stabilizer bar components can be replaced individually.

Rear Suspension Components

Part 1 Of 2:

Part 2 Of 2:

The rear strut and spring assemblies can be disassembled to replace any of the individual components. The rear strut and spring assemblies can be replaced independently.
The rear wheel hubs cannot be disassembled. The rear wheel hubs contain the rear wheel bearings and must be replaced as an assembly.
The LH and RH rear wheel spindles can be replaced individually.
The rear suspension arm and bushings can be replaced individually.
Only toe can be adjusted on the rear suspension.