Child Safety Seat, Base
SEAT - CHILD SAFETY, BASEDISASSEMBLY
1. Disconnect the hook and loop strip.
2. Remove the hog rings.
3. Remove booster pad number 2.
1 Invert the child safety seat trim cover.
2 Remove booster pad number 2.
4. Remove booster pad number 1.
1 Invert the child safety seat trim cover.
2 Remove booster pad number 1.
ASSEMBLY
WARNING: All built-in child restraints, including seats, buckles, retractors, seat latches, interlocks, and attaching hardware should be inspected by a qualified dealer technician after any collision. If the child seat was in use during a collision, ford recommends replacing it. However, if the collision was minor and a qualified technician finds that the child restraints do not show damage and continue to operate properly, they do not need to be replaced. Built-in child seats not in use during a collision should also be inspected and replaced if either damage or improper operation is noted.
1. Install booster pad number 1.
1 Position booster pad number 1.
2 Invert the child safety seat trim cover.
2. Install booster pad number 2.
1 Position booster pad number 2.
2 Invert the child safety seat trim cover.
3. Install the hog rings.
4. Connect the hook and loop strip.