Front Door Window Glass: Adjustments

1. Remove the door trim panel.
2. Remove the water shield.
3. Remove the convertible top weatherstrip.
4. Position the door window glass to the full up position.

NOTE: The door must be closed to carry out this step.







5. Loosen the two door window regulator clamp bolts.
6. Install a 13 mm (0.52 in) wedge between the top of the glass and the convertible top No.4 frame.







7. Tighten the two door window regulator clamp bolts.
8. Remove the 13 mm (0.52 in) wedge.
9. Install the water shield.
10. install the door trim panel.
11. Operate the door window glass and check for binding and correct alignment.