Connecting Rod, Engine

Connecting Rod
- Piston Pin Bore Diameter 22.94-22.98 mm (0.90315-0.90472 inch)
- Crankshaft Bearing Bore Diameter 61.635-61.655 mm (2.4266-2.4274 in
- Out-of-Round Limit-Piston Pin Bore 0.003 mm (0.00012 inch)
- Taper Limit Piston Bore 0.003 per 25 mm (0.0001 per inch)
- Length (Center-to-Center) 154.66-154.74 mm (6.08896-6.09211 inch)
Alignment (Bore-To-Bore Max. Diff.)
- Twist 0.059 per 25 mm (0.002 per inch)
- Bend 0.04 per 25 mm (0.0016 per inch)
Side Clearance (Assembled to Crank)
- Standard 0.11 -0.49 mm (0.0047-0.01929 inch)
- Service Limit 0.36 mm MAX (0.014 in MAX)