Seats: Description and Operation

Seats - Front Power
The front power seat features:
^ a six-way seat regulator control switch located on the front of the seat.
^ a seat track mounted under the seat.
^ a seat regulator motor and gear housing mounted on the seat track.
^ an optional power lumbar switch located on the side of the seat.
^ a manual seat backrest release handle on the outboard rear corner of the seat.

Seats - Power Lumbar Support
The power lumbar support system consists of:
^ seat control switch
^ front seat backrest pad adjusting pump
^ front seat adjusting motor drive tube
^ system wiring and circuit protection
^ front seat backrest adjusting hose

Seats - Front Seat Backrest Latch

NOTE: Under no circumstances are the front seat backrest latch components to be repaired as individual components. If a front seat backrest latch or component is non-functional or damaged, a new front seat backrest latch must be installed.

A release handle on the outboard rear corner of the seat backrest is manually operated to unlock the front seat backrest latch.

Seat- Rear
The rear seat cushion pad and frame is retained in the following manner:
^ Pins are located on the bottom front of the rear seat cushion pad and frame which secure the rear seat cushion pad and frame to the front floor pan.
^ The pins are inserted into locking plates on the floor crossmember with a push button release.
^ The bottom of the rear seatback frame is retained with screws to the front floor pan.