Rear Window Wiper Motor

REMOVAL

CAUTION: Disconnect the battery ground cable.







1. Remove the wiper arm.
^ Lift up the plastic cap and loosen the nut approx. two turns.
^ Lift the wiper arm and release them from the taper by moving them to one side.
^ Remove the nut and the wiper arm.

NOTE: Ensure that the wiper motor is in park position.







2. Detach the cover.
^ Remove two bolts.
^ Unclip ten clips.







3. Remove the wiper motor.
1. Disconnect the wiper motor electrical connector.
2. Remove the ground lead.
^ Remove three bolts.







4. Remove the wiper motor from the bracket.

INSTALLATION
1. Install the components in the reverse order.

NOTE: Ensure that the wiper motor is in the parked position.

2. Check operation of wipers.