Accelerator Cable - 1.8L/2.0L

REMOVAL







1. Disconnect the accelerator cable.
1. Remove the accelerator retaining clip.
2. Disconnect the accelerator cable.







2. Detach the accelerator cable from the bracket.
1. Rotate the cable to release.
2. Detach the accelerator cable.







3. Remove the footwell trim panel.







4. Disconnect the accelerator cable from the pedal.







5. Attach a draw cord to the accelerator cable to assist with installation.
6. Remove the accelerator cable.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: The rubber grommets must be installed into the bulkhead and throttle body bracket before the accelerator cable is installed into the grommets.